The Unleashed does exactly the same thing as fully pressing the cameras shutter button, nothing more, nothing less. Aside from the obvious M | AF switch on the camera body or the M/A | M switch on the lens, there are also some settings in the camera menu which hinder the camera from auto focussing […] Read more…
Yes! The compatible GPS Receivers are: Holux M-241 Plus QStarz BL-1000ST QStarz BL-1000GT QStarz BL-818GT *new* Transystem GL-770 These GPS Receivers are some of the few that support Bluetooth Low Energy. Unfortunately most other GPS receivers use only Classic Bluetooth (as did our Unleashed’09) but the Unleashed ’18 is not compatible with those. The above […] Read more…
Yes, it is very likely that it will work with your L-bracket. Most L-Brackets have a cut-out area around the connectors, so you still have access to the sockets. This is exactly where the Unleashed plugs in, and since it is so small, it will usually fit in that cutout area. On Nikons Pro DSLRs, […] Read more…
Auto Exposure Ramped Timelapse: The Holy Grail Day-to-night or night-to-day transition timelapses are often referred to as “Holy Grail” timelapses. For timelapses like these, the exposure needs to be adjusted continuously as the lighting conditions slowly change. Since you can’t (or rather shouldn’t) touch the camera while shooting a timelapse to minimize unwanted movements and […] Read more…
Timelapse 1. The top area of the screen shows a summary of the camera’s current settings. You can change those settings by tapping on that area to see the detailed camera settings. 2.In the center area you can set the interval i.e. in what frequency a photo should be taken, and the duration i.e. for […] Read more…
Photo Review Photo Review lets you see a small thumbnail image after triggering for you to roughly check exposure and composition. Here’s how to set it up: 1. Tap the photo review icon at the bottom right of the screen to configure photo review settings. With the switch you can turn photo review on and […] Read more…
Geotagging 1. Tap the satellite icon at the bottom right of all the settings to configure geotagging. There are three pickers/columns. 2. The first picker lets you turn geotagging on or off. Depending on the camera you might as well be able to choose what source for the GPS coordinates should be used. 3. The […] Read more…
Photo Mode 1. In every mode the trigger button is in the bottom center so you’re always able to take a photo. 2. To change the camera’s settings, just tap the settings you want to adjust. Scroll the picker to select the value you want – values will be updated in the camera immediately. 3. […] Read more…
Pairing multiple Unleasheds 1. You can manage your Unleasheds in the “YOUR UNLEASHEDS” screen. To get there, tap the Unleashed settings icon at the bottom of the app menu. 2. In this screen, the app is continuously searching for Unleasheds. Just tap on each Unleashed you want to pair. If the pairing was successful, the […] Read more…
Disable and unpair your UNLEASHED Disconnect/Manually Disable 1. You can manage your Unleasheds in the “YOUR UNLEASHEDS” screen. To get there, tap the Unleashed settings icon at the bottom of the app’s menu. 2. Tap the switch next to the Unleashed in order to disable it and temporarily disconnect it from your phone. 3. This […] Read more…